These all PVC window ranges represent the choice of renovators for their affordable costs and easy interior maintenance.
Both window models are made from Ph Tech extrusions, known for its high quality of PVC pure at 100%. The PVC is treated against the sun’s ultraviolet rays and glossed for easier maintenance.
Its multichamber structure guarantees the integrity and solidity of the window season after season.
From the extruder recognized for the best quality of uPVC in Quebec.
uPVC made from 100% virgin powder.
Guaranteed against discolouration and breakage of equipment.
The shap is flat, easy to clean. The corners are welded, eliminating water and air infiltration.
The window having the most air chambers with a frame of 4 9/16 inches deep.
In addition, its deeper frame positions the seal glass unit in the warm part of the wall, thus reducing the risk of condensation.
Increased robustness, rigidity and insulation, loved by builders for its ease of installation.
Maximum weatherstrip on the market.
3 weatherstrip separated each by a plasticized weather cut. The ultimate.
Black stripe for a beautiful appearance with the black interlayer of seal glass unit. Does not shrink or split.
The available exterior mouldings adapt to all constructions in Quebec.
Molded directly into the extrusion, they eliminate all possibilities of water infiltration and cold.
They allow the seal glass unit to be placed in the cold part of the wall to reduce the risk of visible moisture on the glass.
They also give relief and a different appearance to a window.
The 5/8 inch solid pine blowing is jointed for strength and coated with PVC.
Coated with PVC for easy maintenance and cleaning. Can be easily removed on all 4 sides in case of untimely damage. No cap or screws visible since it is covered with a PVC capage.
Can be unlined pine or solid PVC for bathroom.
The bottom shap opens up. The top remains fixed.
The bottom shap tilts inwards for easy cleaning.
The bottom shap opens up. The top can go down.
The top and bottom shaps tilt inwards for easy cleaning.
The screen, by default is full size. option; 1/2 window.
Depending on the window width, there will be 1 or 2 central bars.
The hung window is provided with spiral on each side, not visible, to allow an opening according to the desired level.
The slide design for the screen allows easy removal from the inside.
It is possible to have the net in 1/2 or full size.
The full-width handle integrated into the shutter greatly facilitates its handling.
This seal glass unit consist of 2 windows with the Swisspacer interlayer with Low-E coating and argon gas.
Allows to keep the maximum solar gain inside for a reduction of heating costs.
This seal glass unit consist of 2 windows with the Swisspacer interlayer with a Low-E coating and argon gas.
Allows a lower input of solar gain for a more comfortable atmosphere in summer.
Significantly reduces air conditioning costs. Ideal on heavily sunny walls.
TSeal glass unit consisting of 2 special windows with the Swisspacer interlayer promoting peace of mind, option of Energiverre or Climativerre seal glass unit.
The Acoustiverre seal glass unit is about 25% more efficient in terms of noise transmission reduction (STC) than a regular one.
At Fenexart, we prefer the Swisspacer tab.
This feature eliminates the plastic corners that often cause gas to leak and water vapour to enter between the lenses.
The Swisspacer has the lowest level of thermal conductivity on the market.
The most varied offer with countless possibilities.
Of all shapes and sizes.
New; tiling 1 3/4 inches.
More than 100 solid color choices, both outside and inside the product by our own Dumoulin paint factory.
Peinture Dumoulin was founded in 1980. At the time, the main activity of the company was making kitchen cabinet finishing.
In 1982, the company took off with the start of painting steel doors.
After a few years, the activities of the company expanded by adding a paint shop of PVC windows as well as, windows and aluminum extrusions.
To meet growing demand, the factory was expanded to 27,000 square feet to accommodate the expansion of our six paint chambers. In total, more than 25 employees are part of the Dumoulin team of the Aluminart group.
Specialist in glazing doors and windows, we use Flexacron™ HR liquid paint, a high-quality, heat-resistant paint. Flexacron™ HR is an elastomeric polyurethane coating product consisting of a pigmented component and a clear, reactive processing agent. It gradually transforms into a protective film against ultraviolet rays, pollutants, abrasive agents, as well as acid rain.
Flexacron™ HR has been formulated with highly selective pigments that reflect infrared sunlight. This very special property reduces heat accumulation on the surface of exposed PVC and the temperature remains low enough to prevent warping and discolouration.
This ensures that the color you choose will remain durable and beautiful for years to come.
